When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network. 2019 S-WORKS Stumpjumper FSR ST – NEW* Photo Bike The S-WORKS Stumpjumper FSR is a top-of-the-line MTB
2019 S-WORKS Stumpjumper FSR ST – NEW* Photo Bike The S-WORKS Stumpjumper FSR is a top-of-the-line MTB frame destined to be the ultimate trail bike. With its lively, agile design and full carbon chassis and rear end, the 2019 S-WORKS Stumpjumper FSR is destined to be ridden long and hard over whatever terrain gets in the way. This specific model is a 2019 S-WORKS Stumpjumper FSR ST (Short Travel) model that served as a photo bike. The bike is built up with SRAM’s XX1 Eagle 12-speed shifting, Roval Traverse SL carbon wheels, FOX FLOAT DPS Factory rear shock, and FOX FLOAT 34 Factory front fork. As a 2019 Specialized photo bike, this bike has never before been ridden! However, it may show a few surface scratches from handling, but otherwise, a new Specialized mountain bike at a special price! Frame Specifications•Frame: FACT 11m, full carbon chassis and rear end, asymmetrical design, 27.5 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel•Fork: FOX FLOAT 34 Factory, FIT4 damper, 3-position adjustment, Kashima Coating, 15x110mm Kabolt axle, 44mm offset, 130mm of travel•Rear Shock: FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190×45.0mm•Size: Medium •Model Year: 2019 •Wheels: 27.5″ •Brake Type: Disc Brake •Color: Gloss White / Cool Grey Geometry •Size: Medium •Seat Tube Length (Center to Top): 410mm •Effective Top Tube Length (Center to Center): 591mm •Head Tube Length: 110mm •Standover Height: 735mm •Head-Tube Angle: 66.5 degrees •Seat-tube Angle (effective): 76 degrees •Stack: 590mm •Reach: 444mm Component Specifications •Crankset: SRAM XX1 Eagle, Boost™ 148, 170mm crankarm, 24mm spindle•Chainrings: SRAM 32t Eagle•Rear Derailleur: SRAM XX1 Eagle, 12-speed•Cassette: SRAM X01 Eagle, 12-speed, 10-50t•Seatpost: Command Post IRcc, 16-position micro-height adjustable, two-bolt head, bottom mount cable routing, remote SRL lever, 34.9mm, 160mm•Stem: Syntace MegaForce 2, 6-degree, 31.8mm clamp•Shifter: SRAM XX1 Eagle, trigger, 12-speed •Brakeset: SRAM Guide RSC, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm/180mm•Saddle: Body Geometry Phenom Expert, hollow titanium rails, carbon fiber base, 143mm •Handlebars: Specialized Trail, FACT Carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm, 31.8mm•Pedals: Test-ride platform Wheel Specifications •Rims: Roval Traverse SL 27.5, hookless carbon, 30mm inner width, tubeless ready, hand-built, 24/28h•Front hub: Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h•Rear hubl: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h•Tires: Purgatory/ Butcher, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.3″ 013-497-WHK
Copyright © 2024 specializedmountainbike.com. All Rights Reserved.
){kind=link}
Comments
Comments are disabled for this post.